{"product_id":"c101c","title":"Ramset C101C (Chemset™ 101 Plus) 101 380ml Medium Duty Anchoring Injection Adhesive","description":"\u003cp\u003eRamset C101C (Chemset™ 101 Plus) 101 380ml Medium Duty Anchoring Injection Adhesive\u003cbr\u003e\n        CHEMSET 101 PLUS is a multi-purpose Polyester adhesive for anchoring threaded studs and starter bars in solid and hollow substrates. It is formulated using high performance, marine grade resin, which allows full load capacity in flooded holes to be attained as assessed to ETAG 001-5 Option 7. CHEMSET™ 101 PLUS is styrene free and VOC compliant. Fast cure and fast dispensing for high productivity. Non-drip formula, ideal for overhead installation. Steel columns and beams, seating, machinery, facade pins, handrails, gates, starter bars, bottom plate fixing.\u003cbr\u003e\nFeatures \u0026amp; Benefits:\u003c\/p\u003e\n\n\u003cp\u003eEasy dispensing, even in cold weather\u003cbr\u003e\nSag resistant formula for horizontal holes and overhead application\u003cbr\u003e\nTap value to preserve contents between uses.\u003c\/p\u003e\n\n\u003cp\u003eKey Features:\u003c\/p\u003e\n\n\u003cp\u003eFast Cure\u003cbr\u003e\nSolid and hollow Substrates\u003cbr\u003e\nEasy dispensing all year round\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003eAppearance: Part A: Mauve, part B: Green, Mixed: Green \/ Grey\u003cbr\u003e\nChemical Type: Polyester\u003cbr\u003e\nDensity: 1.55kg \/ Litre @ 20?C Hardness\u0026gt; Shore D 80\u003cbr\u003e\nHeat Distortion Temperature: Approx. 80?C\u003cbr\u003e\nCompressive Strength (ASTM C579-01): 20 MPaWorking time (min) @ 20?C 5 to 10\u003cbr\u003e\nLoading Time @ 20?C 90 minute s: Min Installation Temp (?C) 0Max Installation Temp (?C) 43\u003cbr\u003e\nMin Service Temp (?C) -10Max Service Temp (?C) 80\u003cbr\u003e\nSubstrates: Solid Concrete, Solid Stone (proof loading recommended), Solid Brick, Hollow Concrete Block, Hollow Brick\u003c\/p\u003e\n\n\u003cp\u003eTrade:\u003c\/p\u003e\n\n\u003cp\u003eConcreter\u003cbr\u003e\nBuilding Contractor\u003cbr\u003e\nCivil Contractor\u003cbr\u003e\nContractor\u003c\/p\u003e\n\n\u003cp\u003eApplication:\u003c\/p\u003e\n\n\u003cp\u003eConcreter: Starter Bars\u003cbr\u003e\nThreaded Studs, Starter Bars, Hollow Masonry Sleeves, Remedial Wall Ties\u003cbr\u003e\nStarter Bars Steel Fabricator Threaded Studs, Hollow Masonry Sleeves Balustrade\u003cbr\u003e\nContractor Threaded Studs, Hollow Masonry Sleeves Form worker Starter Bars\u003cbr\u003e\nBricklayer Starter Bars, Remedial Wall Ties Fitter Threaded Studs, Hollow Masonry Sleeves Seating\u003cbr\u003e\nThreaded Studs Facade Contractor\u003cbr\u003e\nThreaded Studs\u003c\/p\u003e\n\n\u003cp\u003eUses:\u003c\/p\u003e\n\n\u003cp\u003eMachinery hold down\u003cbr\u003e\nStructural steel connections\u003c\/p\u003e\n\n\u003cp\u003eRaker angles\u003cbr\u003e\nColumn hold down\u003c\/p\u003e\n\n\n\u003cp\u003eSeating\u003cbr\u003e\nHand rails\u003cbr\u003e\nFencing\u003cbr\u003e\nBalustrade posts\u003cbr\u003e\nStarter bars\u003cbr\u003e\nTimber and steel house frame bottom plates to comply with BCA and Wind Code\u003cbr\u003e\nClose to edge applications\u003cbr\u003e\nSafety barriers\u003c\/p\u003e\n\n\u003cp\u003eInstallation in solid:\u003c\/p\u003e\n\n\u003cp\u003eDrill hole to specified diameter and depth\u003cbr\u003e\nRemove dust and debris by brushing and blowing 3 times each (if hole is wet or flooded, brush only remove water and slurry with wet \/ dry vacuum)\u003cbr\u003e\nScrew mixing nozzle onto cartridge and dispense 2-3 trigger pulls of adhesive to waste until colour is green \/ grey with no streaks\u003cbr\u003e\nInsert tip of Nozzle to bottom of the hole and dispense adhesive\u003cbr\u003e\nFill hole to about 2\/3 full\u003cbr\u003e\nInsert threaten stud or reinforcing bar with rotating motion to release trapped air\u003cbr\u003e\nWait until adhesive has fully cured before loading\u003cbr\u003e\nClean up with acetone\u003c\/p\u003e","brand":"Ramset","offers":[{"title":"Default Title","offer_id":55806964695332,"sku":"C101C","price":59.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/5028\/1508\/files\/B1429AB516C00797DE3B5FC1D0E32FF076C4E1ADEDF744D753996A2CEAD55EFB.jpg?v=1784873009","url":"https:\/\/mclautoparts.com.au\/products\/c101c","provider":"MCL Autoparts","version":"1.0","type":"link"}